VPN connections section¶
To create a VPN connection between private cloud and customer gateway, the latter must be registered first. Route between virtual networks and private networks behind the customer gateway can be configured manually using route tables or BGP protocol.
customer gateway registration¶
Click button to register customer gateway.
When registering customer gateway, specify:
- Gateway IP address;
- Type (currently, only ipsec.1 type is supported)
- BGP ASN – autonomous system number.
If no autonomous system is shared, then use a number from a private range (64512 - 65534). After the customer gateway is determined, you can create VPN connection.
Creating a VPN connection¶
Click to create a VPN connection.
Setting customer gateway¶
To obtain customer gateway settings after VPN connection is created, click button.
The settings can be generated in the following formats:
- configuration for Cisco IOS version 12.4 and higher, RedHat Linux OpenS/WAN Quagga, and Linux OpenS/WAN Quagga;
- Text description with all Generic parameters
Click button to save the customer gateway settings in .cfg format on local PC.
Attention! The customer gateway should support IPsec and ipip tunnels!*
Click More… to show a list of additional shared actions.
Deleting a VPN connection¶
Select “Delete VPN connection” to delete a connection between VPC and a customer gateway. VPN connection will be deleted after your confirmation.
Deleting a customer gateway¶
Select “Delete customer gateway” to delete a customer gateway. Attention! This function is available only for a gateway with no active VPN connection.